User manual

User Manual of Network Speed Dome

3. Add a Friendly Name.

Figure 6-22 Configure UPnP Settings

4. Click to save the settings.

 Port Maping

Steps:

1. Check the Enable Port Mapping checkbox

2. Select the Port Mapping Mode as Auto or Manual.

3. If in Manual mode, you can check the checkbox of HTTP, RTSP or SDK port

according to your demand.

4. Click to save the settings.

6.3.10 Configuring Email Settings

Purpose:

The system can be configured to send an Email notification to all designated

receivers if an alarm event is detected, e.g., motion detection event, video loss,

tamper-proof, etc.

Before you start:

Please configure the DNS Server settings under Basic Configuration > Network >

TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email

function.