User manual

User Manual of Network Speed Dome

Figure 4-5 Setting a Preset

2. Use the PTZ control buttons to move the lens to the desired position.

• Pan the speed dome to the right or left.

• Tilt the speed dome up or down.

• Zoom in or out.

• Refocus the lens.

3. Click to finish the setting of the current preset.

4. You can click to delete the preset.

You can configure up to 256 presets.

 Calling a Preset:

In the PTZ control panel, select a defined preset from the list and click to call the

preset.

Figure 4-6 Calling a Preset

The following presets are predefined with special commands. You can only call them

but not configure them. For instance, preset 99 is the “Start auto scan”. If you call the

preset 99, the speed dome starts auto scan function.