User manual

User Manual of E Series IR Network Speed Dome

Short Illumination Distance

LEDs ON

Call preset 122. The four IR LEDs in the

second and third rows are turned on.

All LEDs ON

Call preset 123. All the IR LEDs are turned

on.

All LEDs OFF

Call preset 124. All the IR LEDs are turned

off.

Fan and Heater Mode

Call the system-defined presets to adjust the mode of fan or heater. The

corresponding modes and presets are as follows:

Mode

Description

Fan ON by Temperature

Control

Call preset 125. The fan is controlled

automatically by the temperature in the

speed dome.

Fan ON

Call preset 126. Turn on the fan.

Fan OFF

Call preset 127. Turn off the fan.

Heater ON by Temperature

Control

Call preset 128. The heater is controlled

automatically by the temperature in the

speed dome.

Heater OFF

Call preset 129. Turn off the heater.

6.5.2 Configuring OSD Settings

Purpose:

The speed dome supports following on screen displays:

Time: Supports for time display.

Camera Name: Identifies the name of speed dome.

You can customize the on screen display of time.

Steps:

1. Enter the OSD Settings interface:

Configuration > Advanced Configuration > Image > OSD Settings