User manual

User Manual of E Series IR Network Speed Dome

Delete all the presets in one patrol

4.4.4 Setting / Calling a Pattern

Purpose:

A pattern is a memorized series of pan, tilt and zoom functions. It can be called with

system-defined preset.

Setting a Pattern:

Steps:

1. Call preset 130 to start a pattern.

2. Control the PTZ to set a motion route as the pattern route.

3. Call preset 131 to save the pattern.

Then you can call preset 132 to call the pattern.

4.5 Configuring Live View Parameters

 Main stream/Sub-stream/Third stream:

You can select or as the stream type of live viewing.

The main stream is with a relatively high resolution and needs much bandwidth. The

sub-stream is with a low resolution and needs less bandwidth. The default setting of

stream type is .

Note: Please refer to Section 6.4.1 Configuring Video Settings for more detailed

parameter settings of the main stream and sub-stream respectively.

 Image Size:

You can scale up/down the live view image by clicking . the

image size can be 4:3, 16:9, original or auto.