User manual

User Manual of E Series IR Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
25
scan
Control
106
Start park with frame scan
126
Fan ON
107
Start park with random
scan
127
Fan OFF
108
Start park with pattern
scan
128
Heater ON by Temperature
Control
109
Reserved
129
Heater OFF
110
Reserved
130
Start pattern
111
Reserved
131
Stop pattern
112
Start park with preset 1
132
Call pattern
113
Start park with preset 2
200
Initialize PTZ parameters
4.4.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
3. Click to enter the adding interface of preset as shown in Figure 4-6.
Figure 4-6 Adding Presets