User manual

User Manual of E Series IR Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
24
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
Note: You can configure up to 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Figure 4-5 Calling a Preset
Note: The following presets are predefined with special commands. You can only call
them but not configure them. For instance, preset 97 is the “Start random scan”. If
you call the preset 97, the speed dome starts random scan function.
Table 4-3 Special Presets
Special
Preset
Function
Special
Preset
Function
94
Remote reboot
114
Start park with preset 3
95
Reserved
115
Start park with preset 4
96
Stop a scan
116
Start park with preset 5
97
Start random scan
117
Start park with preset 6
98
Start frame scan
118
Start park with preset 7
99
Start pan scan
119
Start park with preset 8
100
Start tilt scan
120
IR LED Auto
101
Start panorama scan
121
Long Illumination Distance
LEDs ON
102
Stop a park
122
Short Illumination Distance
LEDs ON
103
Start park with pan scan
123
All LEDs ON
104
Start park with tilt scan
124
All LEDs OFF
105
Start park with panorama
125
Fan ON by Temperature