User manual

E-series High-definition Camera·User Manual
26
26
Figure 2-25 Bullet Camera Installation
4. Three-axis adjustment.
1). Preview the image of the camera on a monitor.
Note: You must loosen the lock screw before adjustment and tighten it
when you adjusted it.
2). Rotate the panning axis to adjust the panning position of the camera.
The adjustable range is from 0 degree to 360 degrees.
3). Rotate the tilting axis to adjust the tilting position of the camera. The
adjustable range is from 0 degree to 90 degrees.
4). Rotate the lens to adjust the azimuth angle of the image. The
adjustable range is from 0 degree to 360 degrees.
Ceiling