User manual

E-series High-definition Camera·User Manual
25
25
2.4 Installation of DS-2CE1512P(N)-IR and
DS-2CE1582P(N)-IR Bullet Camera
Figure 2-24 Overview
Steps:
1. Place the drill template on the wall/ceiling and mark screw positions.
2. Route the cables inside the ceiling or on the surface. If you want to route the
cables inside the ceiling, drill the cable hole with the drill template in the
ceiling for wiring; pull all cables through the hole and terminate all wires (if
not already terminated).
3. Connect the video cable and power cable and use the screws to secure the
mounting base with camera.
Power cable
Video cable
Mounting base