User manual

E-series High-definition Camera·User Manual
23
23
6. Attach the mounting base cover to the mounting base and rotate it slightly
but not tightly, so that you can make adjustments to the camera and lens.
Figure 2-21 Attach the Mounting Base Cover
7. Three-axis adjustment.
1). Preview the image of the camera on a monitor.
2). Rotate the panning table to adjust the panning position of the camera.
The adjusting range is from 0 degree to 360 degrees.
3). Loosen the tilting lock screw.
4). Rotate the tilting table to adjust the tilting position of the camera. The
adjusting range is from 0 degree to 85 degrees.
5). Tighten the tilting lock screw.
6). Rotate the lens to adjust the azimuth angle of the image. The rotating
movement range is from 0 degree to 360 degrees.
Rotate clockwise