User manual

E-series High-definition Camera·User Manual
20
20
5. Connect the video cable and power cable and install the dome and the
enclosure to match the mounting base and fasten the set screw slightly but
not tightly, so that you can make adjustments to the camera and lens.
Figure 2-15 Install the Enclosure and Dome
6. Preview the image of the camera on a monitor and adjust the lens to the
optimum angle and fasten the set screw tightly.
Note: The adjustable tilt angle range is 0 ° ~ 75 °.
Figure 2-16 Fasten the Set Screw
0°~75°