User manual

E-series High-definition Camera·User Manual
16
16
Figure 2-7 Remove the Bubble
2. Secure the DS-1244ZJ (not supplied) to the single gang box with screws.
Figure 2-8 Secure the DS-1244ZJ
3. Route the cables inside the ceiling or on the surface. If you want to route the
cables inside the ceiling, drill the cable hole in the ceiling for wiring; pull all
cables through the hole and terminate all wires (if not already terminated).
4. Connect the video cable and power cable and secure the back box of the
camera to the DS-1244ZJ with the screws.
Single gang box
DS-1244ZJ