User manual

E-series High-definition Camera·User Manual
14
14
5. Three-axis adjustment.
1) Preview the image of the camera on a monitor.
2) Rotate the panning table to adjust the panning position of the camera. The
adjusting range is from 0 degree to 355 degrees.
3) Loosen the tilting lock screw.
4) Rotate the tilting table to adjust the tilting position of the camera. The
adjusting range is from 0 degree to 90 degrees.
5) Tighten the tilting lock screw.
6) Rotate the lens to adjust the azimuth angle of the image. The rotating
movement range is from 0 degree to 355 degrees.
Figure 2-4 Adjust the Lens
6. Rotate the bubble clockwise to reinstall it to the dome camera.