User manual

E-series High-definition Camera·User Manual

Steps:

1. Rotate the bubble counterclockwise and remove it.

Figure 2-2 Remove the Bubble

2. Drill the holes on the wall with the supplied drilling template.

3. Route the cables inside the ceiling or on the surface. If you want to route the

cables inside the ceiling, drill the cable hole in the ceiling for wiring; pull all

cables through the hole and terminate all wires (if not already terminated).

4. Connect the video cable and power cable and secure the back box of the

camera to the ceiling with the screws.

Figure 2-3 Secure Back Box to the Ceiling