Installation manual

Installation Manual of Network Camera
77
Figure 5-2 Wiring Diagram
5.1.2 Installation
The cube camera can be installed to wall or ceiling. Ceiling mounting is taken as an example in this
section; if you adopt wall mounting, you can also take below procedure as a reference.
Steps:
1. Fix the bracket to the ceiling.
Figure 5-3 Fix the Bracket
Notes:
 For cement ceiling mounting, you need to use expansion screw to fix the bracket, and the hole
of the expansion pipe should align with the mounting hole of mounting base.
 For wooden ceiling mounting, you can just use the self-tapping screw to fix the bracket.
 The ceiling must be strong enough to withstand more than 3 times the weight of the camera
and the bracket.
2. Aim the screw hole on the camera at the bracket and rotate the camera tightly.