Installation manual

Installation Manual of Network Camera
70
Figure 4-28 Assemble the Camera
Note: For water-proof, please align the rotating label on the front cover with that on the camera
when you rotate the front cover clockwise. Refer to Figure 4-28(right).
Mounting
This camera is equipped with a bracket on the bottom. It can be mounted to a wall directly and can
also be mounted to a wall with a junction box or a gang box.
Wall mounting
Steps:
1. Attach the drill template (supplied) to the wall where the camera is to be mounted.
2. Drill screw holes in the wall according to the number one holes of the drill template. Refer to
the Figure 4-29.
Rotating Label