Installation manual

Installation Manual of Network Camera

1. Disassemble the camera. Refer to the section 2.1.

2. Install the gang box in the ceiling.

3. Attach the mounting base to the gang box with two screws.

Figure 3-75 In-ceiling Mount

Figure 2-8 In-ceiling Mount

4. Route the cables through the hole in the center of the mounting base.

5. Align the camera with the mounting base.

6. Tighten the screws to secure the camera with the mounting base.

7. Connect the video output connector to the monitor. Connect the power connector to the power

supply.

8. Adjust the image and focus. Please refer to the section 2.3 for more detailed information.

Screw Hole

Mounting Base