Installation manual

Installation Manual of Network Camera
6
Figure 2-7 Mount the Camera
Note: This camera is designed for indoor and outdoor use. To use the camera outdoors, it must be
installed in an approved outdoor housing as shown in Figure 2-8.
Figure 2-8 Wall Mounting with the Housing
4. Loosen the panning lock screw, you can adjust the panning angle of the camera up to 360°
(Figure 2-9); Loosen the tilting lock screw, you can adjust the tilting angle of the camera up to
90° (Figure 2-10).
Figure 2-9 Panning