Instruction manual

Network Dome Camera·Quick Operation Guide
14
14
1). Loosen the lock screw besides the lens.
2). Hold the plastic plate and rotate the camera to adjust the
panning angle [0~350°].
3). Push the lens forward and backward to adjust the tilting angle
[0~80°]
4). Rotate the lens to adjust the azimuth angle of the camera
[0~350°]
5). Tighten the lock screw.
3-axis Adjustment Figure 2-4
6. Adjust the Lens
1). Connect the VIDEO OUT interface of the camera to the
debugging monitor.
2). Set the iris type to MANUAL first.
3). Adjust the No.2 Zoom Lever (T~W) to select a proper angle of
view.
Tilt 0~80°
Pan 0~350°
Rotation 0~350°