Instruction manual

Network Dome Camera·Quick Operation Guide
10
10
Description of Type II Dome Camera Table 1-2
No.
Description
No.
Description
1
Bubble
6
10/100M Self-adaptive
Ethernet Interface
2
SD Card Slot
7
Lens
3
Video Out Interface
8
Audio/Alarm Cables
4
Reset
9
Mounting Base
5
Power Cable
10
● The most distinguish difference between type I and type II dome
camera is type II dome camera has an internal PT (Pan and Tilt)
control unit, and you can adjust the pan and tilt angle of the
camera from the client software or via web browser.
● Press RESET about 10s when the camera is power on or rebooting
to restore the default settings, including the user name, password,
IP address, and the port No., etc.