User manual

High-definition Vandal-proof Dome Camera· User Manual
34
34
7. Return to the MAIN MENU and click SAVE ALL.
8. You can find the BLOCK DISP take effect after you exit the
main menu.
MONITOR AREA
Steps:
1. Move the cursor to MOTION DET, select ON and press the
menu button to enter the submenu.
2. Position the cursor on DETECT SENSE, and set the menu
button left/right to adjust the sensitivity level.
3. Position the cursor on MONITOR AREA. Select OFF to disable
area motion detection. Select ON to enable area motion
detection.
4. Position the cursor on AREA SEL to select one area. There are
four areas available.
5. Set the values of TOP, BOTTOM, LEFT and RIGHT. The size
and position of the area is defined by these values. And after
you set all this value, you can see a frame on the image.
6. Return to the MAIN MENU and click SAVE ALL.
7. You can find the MONITOR AREA frame take effect after you
exit the main menu.
Note:
The MONITOR AREA frame takes effect only when the BLOCK
DISP panes are included in the MONITOR AREA frame.