User manual

High-definition Vandal-proof Dome Camera· User Manual
15
15
Figure 2-8 Install the Camera
6. Adjust the lens.
1). View the camera image via the monitor.
2). Loosen the lock screw besides the lens
3). Rotate the panning table to adjust the panning position of
the camera. 0 to 355° is adjustable.
4). Rotate the tilting table to adjust the tilting position of the
camera. 0 to 75° is adjustable.
5). Rotate the lens to adjust the azimuth angle of the image. 0
to 355° is adjustable.
6). Tighten the lock screw.
7). Move the focus lever and zoom lever to adjust the focus
and the zoom.
7. Attach the black liner back to the camera.