User manual

Day Night Box Camera· User Manual
83
83
CAMERA ID
CAMERA ID ON ▽
- - - - - - - - - - - - - -
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!”#$%&’
()_`,:;<=>?@\^*.x+/
← → CLR POS
RETURN
Figure 3-29 CAMERA ID
 RS-485 Setting
If you need to configure the menu items remotely, you have to set
the RS-485 parameters of control device the same as those of
camera. The default address is 0, protocol is PELCO-D, and
baudrate is 9600.
Steps:
1. Move cursor to RS485 SET in the main menu.
2. Press the menu button to display the RS-485 setting menu on
the screen.
 ADDRESS
The address ranges from 0 to 254.
 PROTOCOL
PELCO-P and PELCO-D are selectable.
 BAUDRATE
You can set the baudrate to 1200, 2400, 4800, 9600, 19200 or
115200(bps).