User manual

Day Night Box Camera· User Manual

3.1.16 Defective Pixel Correct Setting

Exit the main menu and in the live view interface, set the menu

button to left for about 2 seconds to enable auto DPC function.

Note: This function is more active in the absolutely dark

environment. Make sure that the IRIS of lens is closed before using

this function.

3.1.17 RS-485 Setting

There is no menu item for setting the RS-485 parameters. If you

need to configure the menu items remotely, you have to set the

RS-485 parameters of control device the same as those of camera.

The default RS-485 parameters of camera are as follows:

Table 3-2 Default RS-485 Parameters

Parameter

Default value

Baudrate

4800

Address

001

Protocol

PELCO-D.

Note: Only the models with suffix ‘-A’ support RS-485 functions.

3.1.18 Save All/Exit

Move the cursor to the Exit, and press the menu button to exit the

settings without saving.