User manual

Day Night Box Camera· User Manual
52
52
3. Position the cursor on MONITOR AREA. Select OFF to disable
area motion detection. Select ON to enable area motion
detection.
4. Position the cursor on AREA SEL to select one area. There are
four areas available.
5. Set the values of TOP, BOTTOM, LEFT and RIGHT. The size
and position of the area is defined by these values. And after
you set all this value, you can see a frame on the image.
6. Return to the MAIN MENU and click SAVE ALL.
7. You can find the MONITOR AREA frame take effect after you
exit the main menu.
Note: The MONITOR AREA frame takes effect only when there
are BLOCK DISP panes in the MONITOR AREA frame.
MOTION DET
DETECT SENSE ----|---- 111
BLOCK DISP OFF
MONITOR AREA ON
AREA SEL 1/4
TOP ----|---- 128
BUTTOM ----|---- 128
LEFT ----|---- 128
RIGHT ----|---- 128
RETURN8
Figure 3-9 MOTION DET