User manual
User Manual of IR Speed Dome
© Hikvision
27
3.4.4 Configuring Patterns
Purpose:
A pattern is a memorized, repeatable series of panning, tilting, zooming and preset movements that
can be recalled by a command or automatically performed by a configured function (alarm, park,
time task, and power-up).
PATTERNS
PATTERN NUM 1
EDIT PATTERN
PREVIEW
CLEAR PATTERN
REMAINING 100
BACK EXIT
Figure 3-19 Pattern Configuration Menu
Task 1: Set a pattern.
Steps:
1. Move the cursor to enter the PATTERNS submenu:
MAIN MENUS > DOME SETTINGS > PATTERNS
2. Choose the pattern number.
Steps:
(1) Move the cursor to PATTERN NUM and click IRIS+ to enter edit mode.
(2) Click the up and down direction buttons to select the number of the pattern which is to be
configured.
(3) Click IRIS+ again to confirm.
Note: You can configure up to 4 patterns.
3. Edit the pattern.
Steps:
(1) Move the cursor to EDIT PATTERN and click IRIS+ to enter edit mode.
REMAIN MEMORY 100
DONE: OPEN
QUIT: CLOSE
Figure 3-20 Edit the Pattern