User manual

User Manual of IR Speed Dome

(3) Click the up/down direction buttons to increase/decrease the value.

(4) Click IRIS+ button to confirm and exit.

Y - M - D 07 01 18

H - M - S 15 33 25

DONE: OPEN

QUIT: CLOSE

Figure 3-4 Set the System Time

 Zero angle (initial position) configuration

Purpose:

You can define the initial position in the panning direction on the ZERO ANGLE submenu.

Steps:

1. Move the cursor to ZERO ANGLE using the direction buttons and click IRIS+ to enter.

2. Click the left/right/up/down direction buttons to adjust the view angle.

3. Click IRIS+ button to confirm and exit.

 IR LED Parameters

IR PARAMETER

IR SENSITIVITY LOW

N/M LED CURRNT 2

FAR LED CURRNT 2

REFERENCE HEIGHT(M) N/A

REFERENCE ZOOM N/A

LED CONTROL AUTO

BACK EXIT

Figure 3-5 IR Parameter

 IR Sensitivity:

When the LED CONTROL mode is AUTO, the IR LEDs are turned on or off according to the

illumination of the scene. The IR SENSITIVITY is higher, the IR LEDs are turned on or off easier

when the illumination changes.

The IR SENSITIVITY can be set to LOW, MEDIUM or HIGH.

 LED Current:

Configure the N/M LED CURRENT and FAR LED CURRENT to adjust the brightness of NEAR,

MEDIUM and FAR LEDs. The brightness value ranges from 1 to 10.

 LED Control: