User manual

User Manual of Analog Speed Dome
© Hikvision
18
 RS-485 checksum setting
You can set the 485CHECK SET as ON or AUTO for improving the controlling effect.
 Coaxitron Settings
The Coaxitron transmission function can be enabled to transmit the RS485 signal along with the
video signal via the BNC cable. If the connected encoding device supports the Coaxitron
transmission as well, the RS485 cable will not be necessary.
 Power Off Memory
You can set the duration of Power Memory as 10s, 30s, 60s, 180s or 300s for power off memory.
3.3 Configuring Image Parameters
3.3.3 Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu:
MAIN MENUS > DOME SETTINGS >CAMERA SETUP
CAMERA
FOCUS AF
ZOOM LIMIT 22
ZOOM SPEED HIGH
SLOW SHUTTER ON
IRCUT FILTER AUTO
D/N LEVEL 1
SHARPNESS 8
BACK EXIT
CAMERA
BLC/WDR OFF
BLC LEVEL N/A
AE MODE AUTO
IRIS 10
SHUTTER 50
GAIN N/A
EXPOSURE COMP 7
BACK EXIT
CAMERA
WHITE BALANCE AUTO
RED 210
BLUE 150
IMAGE FLIP OFF
FOCUS LIMIT 1M
INIT LENS OFF
NOISE REDUCE LOW
BACK EXIT
CAMERA
WIDE LIMIT 2.0
CHROMA SUPPRESS 1
SATURATION 1
CONTRAST OFF
HLC ON
HR MODE OFF
GAIN LIMIT 15
BACK EXIT
Figure 3-7 Camera Settings