User manual

User Manual of Network Speed Dome

Steps:

(1) Enter the Server Address of the IP Server.

(2) Click to save the settings.

Note: The Server Address should be entered with the static IP address of the

computer that runs the IP Server software. For the IP Server, you have to apply a

static IP, subnet mask, gateway and preferred DNS from the ISP.

Figure 6-13 IPServer Settings

 HiDDNS:

Steps:

(1) Enter the Server Address: www.hik-online.com.

(2) Enter the Domain name of the camera. The domain is the same with the

device alias in the HiDDNS server.

(3) Click to save the settings.

Figure 6-14 HiDDNS Settings

6.3.5 Configuring SNMP Settings

Purpose:

You can use SNMP to get speed dome status and parameters related information.

Before you start:

Before setting the SNMP, please use the SNMP software and manage to receive the

speed dome information via SNMP port. By setting the Trap Address, the speed dome