User manual

User Manual of E Series 5-inch Speed Dome

Set the HR MODE as ON to adjust the resolution higher. Switch it OFF to disable the function, which

can avoid cross color of the image.

3.3.2 Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video from being live viewed and

recorded. The masked areas can move with the panning/tilting movements and automatically adjust

the size as the lens zooming in/out.

Steps:

1. Move the cursor to enter the privacy mask configuration submenu:

MAIN MENUS > DOME SETTINGS > PRIVACYS

PRIVACY BLANKS

BLANK NUM 1

BLANK STATUS OFF

SET BLANK

CLEAR BLANK

BACK EXIT

Figure 3-7 Privacy Mask Configuration Menu

2. Choose the privacy mask number:

Steps:

(1) Move the cursor to BLANK NUM and click IRIS+ to enter the editing mode.

(2) Click the up and down direction buttons to select a mask number for configuration.

(3) Click IRIS+ again to confirm and exit the editing mode.

Note: The configurable privacy mask number varies according to the camera models.

3. Configure the position and size of the privacy mask.

Steps:

(1) Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in

the following figure. You can see a privacy mask on the live window.