User manual

User Manual of E Series 5-inch Speed Dome

 Fan parameter configuration

You can set the FAN CONTROL as ON or OFF.

 EIS (Electronic Image Stabilization) configuration

You can set the EIS FUNCTION as ON or OFF; and set the EIS LEVEL as 0-3.

Note: The selectable EIS levels vary depending on the camera models.

 Preset direct focus

You can set the preset direct focus function ON/OF on PRESET DFOCUS submenu.

 Protocol settings

You can set the PROTOCOL STATUS SET as ON or OFF, and set the PROTOCOL SET as AUTO

MATCH, PELCP-P, PELCO-D, Private-code, etc.

 RS-485 checksum setting

You can set the 485CHECK SET as ON or AUTO for improving the controlling effect.

 Power Off Memory

You can set the duration of Power Memory as 10s, 30s, 60s, 180s or 300s for power off memory.

3.3 Configuring Image Parameters

3.3.1 Configuring Camera Parameters

Purpose:

You can set the camera parameters including focus, shutter speed, iris, etc.

Enter the camera parameters settings menu:

MAIN MENUS > DOME SETTINGS >CAMERA SETUP

CAMERA

FOCUS AF

ZOOM LIMIT 22

ZOOM SPEED HIGH

SLOW SHUTTER ON

IRCUT FILTER AUTO

D/N LEVEL 1

SHARPNESS 8

BACK EXIT

CAMERA

BLC/WDR OFF

BLC LEVEL N/A

AE MODE AUTO

IRIS 10

SHUTTER 50

GAIN N/A

EXPOSURE COMP 7

BACK EXIT