User manual

User Manual of E Series 5-inch Speed Dome

Chapter 3 Menu Operation

The OSD menu tree is shown in the following figure.

Note: The menu varies depending on the model of speed dome.

Figure 3-1 Main Menu

Before you start:

You can operate the speed dome using the on-screen display menu remotely by connecting to a

DVR or a DVS (encoder).

Examples of entering speed dome menu are listed as follows:

 Enter the menu by pressing buttons: PTZ -> REC -> 9 -> 5 on the front panel of the DVR.

 Enter the menu by pressing buttons: CALL -> 9 -> 5 -> ENTER on the keyboard.

 Enter the menu via the web browser of a DVR/DVS.

Menu operations via the web browser of a DVR will be taken as an example in this chapter.

3.1 Accessing and Operating the Menu

To enter the main menu:

Steps:

1. Connect the video and RS-485 cables of speed dome to a DVR.

2. Visit the DVR via the web browser.

3. View the live video of the speed dome.

4. For PELCO-P/D and other private PTZ protocols, call preset 95 from the preset list in the PTZ

control panel of the DVR.