User manual

User Manual of Ethernet-over-Coax Extender

2.4 Configuring Coax Transmission Bandwidth

You can use the DIP switch settings to configure the downstream bandwidth of

the DS-1H05-T or DS-1H05-T/E module and the upstream bandwidth of the

DS-1H05-R. Refer to the following table:

DIP Switch

Transmitter

21 Mbps

25 Mbps

28 Mbps

36 Mbps

Receiver

3 Mbps

4 Mbps

9 Mbps

11 Mbps

Notes:

• The upstream speed of the multi-channel receiver is fixed at 3Mbps by default.

• Please reboot the device after you have configured the bandwidth via DIP

switch settings.

• The higher value of bandwidth results in shorter transmission distance.

• The transmission distance is also different depending on different types of

coaxial cable.