Installation guide

DS-1246ZJ Bracket Installation Guide

3. Install the back box and the securing plate:

1) Secure the back box to the threaded end of the

mounting bracket with the M4*6 lock screws.

2) Insert the securing plate, and secure it with four M4*8

set screws.

3) Feed the power cable and the video cable through the

back box and the securing plate.

Figure 2-4 Install the Housing

Note

：

When you insert the securing plate to the back box, make

sure the plate side with the raised edges faces towards the

ground

4. Install the Camera:

1). Remove the hex screws on the dome camera with the

supplied screwdriver to separate the camera lid and

the camera.

2). Connect the corresponding power/video cables.

Securing Plate

Back Box