Installation guide

DS-1246ZJ Bracket Installation Guide
3
3
2 Bracket Installation Steps
Note ：
Please make sure that the wall is strong enough to withstand
three times the weight of the camera and the bracket.
1. Drill the holes on the wall
1). Drill four expansion screw holes and one cable hole
on the wall.
2). Feed the power cable and the video cable through the
cable hole.
3). Strike the four φ8 expansion screws into the screw
hole.
Expansion Screw Holes
The Wall
Figure 2-1 Drill the Holes on the Wall
Note: You may only see two expansion screw holes from the
above figure, because the visual line is horizontal, and
the other two expansion screw holes are exactly behind
the visible ones.