Installation Guide

Installation guide
INSTALL_LION-V6
2019/01 Edition
Page 11
For wall mounting:
- Locate the installation location of the router and mark the four mounting holes for the
plate.
- Drill the four holes, insert the anchors appropriate to the nature of the support.
- Attach the plate to the wall with four screws.
- Repeat the above procedure in step 4.
Figure 2 – HIKOB LION installed on a pole.
c. Radio and exposure considerations: orienting well the router:
From your elevated spot, you position the LION to have a good radio coverage and enough
radiation on its solar panel:
– The radio antenna is located right behind the brand sign HIKOB engraved on the
top transparent lid. The radiation pattern are 2 flattened lobes in the orthogonal
direction of the solar panel plane: this determines the zone where emissions and
receptions will be the most effective, see figure.
– The best orientation for the solar panel is where solar radiation is the most
powerful, and you have best results the whole year with a southern exposure and a
60° slant to the horizontal line.