Quick Start Guide

7
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
● Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original
wrapper may result in damage on the device and
the company shall not take any responsibilities.
● Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Battery
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● DO
NOT charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during charging.
● For long-term storage of the battery, make sure it
is fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
● DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
● DO NOT swallow the battery to avoid chemical
burns.
● DO NOT place the battery in the reach of children.
● The battery voltage is 3.85 V, and the battery
capacity is 2100 mAh.
● The battery is certified by UL2054.
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The average
lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
Power Supply
● The input voltage should meet the Limited Power
Source (3.85 VDC, 570 mA) according to the
IEC61010-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the
power socket.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.