User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Image Settings
- Chapter 4 Measure the Distance
- Chapter 5 Set Burn-Prevention
- Chapter 6 Highest Temperature Tracking
- Chapter 7 Picture and Video
- Chapter 8 Client Software Connection
- Chapter 9 CVBS Output
- Chapter 10 Maintenance
- Chapter 11 Frequently Asked Questions
- Chapter 12 Appendix
Handheld Thermal Monocular Camera User Manual
6
Chapter 3 Image Settings
You can set palettes, brightness, scenes, FFC (flat field corrrection), and DPC (defective pixel
correction) to display the best image effect.
3.1 Adjust Diopter
Make sure the eyepiece covers your eye and aim at the target. Adjust the diopter adjustment knob
until the OSD text or image is clear.
Note
When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens.
Figure 3-1 View the Target