User's Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Image Settings
- Chapter 4 Measure the Distance
- Chapter 5 Set Burn-Prevention
- Chapter 6 Highest Temperature Tracking
- Chapter 7 Picture and Video
- Chapter 8 Client Software Connection
- Chapter 9 CVBS Output
- Chapter 10 Maintenance
- Chapter 11 Frequently Asked Questions
- Chapter 12 Appendix
Handheld Thermal Monocular Camera User Manual
18
Chapter 8 Client Software Connection
Connect the device to the T-Vision APP via hotspot, then you can capture picture, record video, or
configure parameters on your phone.
Steps
1. Hold to show the menu of device.
2. Press to enable hotspot function.
3. Turn on the WLAN of your phone and connect to the hotspot.
● Hotspot Name: HIK-IPTS Serial No.
● Hotspot Password: the last 9 digits of serial No.
4.
Search the T-Vision on App Store (iOS System) or Google Play™ (Android System) to download
it, or scan the QR code to download and install the app.
Android System
iOS System
5. Open the APP and connect your phone with the device. You can view the interface of device on
your phone.
Note
The hotspot function will be turned off automatically when power is less than 15%.