Handheld Thermal Monocular Camera User Manual
Handheld Thermal Monocular Camera User Manual Legal Information © 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Handheld Thermal Monocular Camera User Manual CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Handheld Thermal Monocular Camera User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Handheld Thermal Monocular Camera User Manual 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.
Handheld Thermal Monocular Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Handheld Thermal Monocular Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● Use of the product must be in strict compliance with the local electrical safety regulations. Transportation ● Keep the device in original or similar packaging while transporting it. ● Keep all wrappers after unpacking them for future use.
Handheld Thermal Monocular Camera User Manual ● DO NOT expose the device to high electromagnetic radiation or dusty environments. ● DO NOT aim the lens at the sun or any other bright light. Emergency ● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Manufacture Address Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co.
Handheld Thermal Monocular Camera User Manual Chapter 1 Overview 1.1 Brief Description The handheld thermal monocular camera is a handheld device with functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The highsensitivity built-in thermal detector provides you with clear view even in total darkness.
Handheld Thermal Monocular Camera User Manual 1.3 Appearance 1.3.
Handheld Thermal Monocular Camera User Manual 1.3.2 Interface ● ● ● ● Figure 1-2 Overview of Interfaces Lens Cover: protect the lens from dust or scratch. Diopter Adjustment Knob: adjust the view according to your degree of myopia. Cable Interface: charge the device or export files with the supplied cable. Tripod Screw: connected to tripod.
Handheld Thermal Monocular Camera User Manual Chapter 2 Preparation Take out the device and accessories. Check them with the packaging list to confirm device and accessories are included and available for use. Read the user manual to learn the usage methods and cautions. 2.1 Charge Device After the device starts up, the OSD (on-screen display) shows the battery status. When the battery is low, charge the device and ensure it works properly.
Handheld Thermal Monocular Camera User Manual When the device is connected to cable or the battery is enough, press power on the device. Power Off When the device is turned on, hold for 2 seconds to power off the device. 2.3 Menu Description When the device powers on, hold ● Press ● Press ● Press for 2 seconds to to display the menu. Figure 2-2 Menu Description to move the cursor up. to move the cursor down. to confirm and hold it to exit the menu.
Handheld Thermal Monocular Camera User Manual Chapter 3 Image Settings You can set palettes, brightness, scenes, FFC (flat field corrrection), and DPC (defective pixel correction) to display the best image effect. 3.1 Adjust Diopter Make sure the eyepiece covers your eye and aim at the target. Adjust the diopter adjustment knob until the OSD text or image is clear. Note When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens.
Handheld Thermal Monocular Camera User Manual Figure 3-2 Adjust Diopter 3.2 Focus Lens Slightly rotate the focus wheel to focus the objective lens. Figure 3-3 Adjust Objective Lens Note ● DO NOT touch the lens directly with your finger, or place any sharp objects near them. ● This function varies according to different camera models.
Handheld Thermal Monocular Camera User Manual 3.3 Adjust Brightness Select and press to adjust brightness. In white hot mode, the higher the value of brightness is, the brighter the image is. The image effect in white hot mode is showed as picture below and effect in black hot mode is opposite. Figure 3-4 Adjust Brightness in White Hot Mode 3.4 Adjust Contrast Select and press to adjust image contrast. 3.
Handheld Thermal Monocular Camera User Manual Black Hot The hot part is black-colored in view. The higher the temperature is, the more black the color is. Red Hot The hot part is red-colored in view. The higher the temperature is, the redder the color is.
Handheld Thermal Monocular Camera User Manual From high temperature to low temperature, the image is colored in from white, yellow, red, pink to purple. 3.7 Adjust Digital Zoom You can zoom the image by using this function. Press in the view mode, the live view switches between 1 ×, 2 ×, 4 ×, and 8 ×. Note This function varies according to different camera models. 3.8 Flat Field Correction This function can correct non-uniformity of display. Steps 1. Hold to go to the menu. 2.
Handheld Thermal Monocular Camera User Manual 3.9 Correct Defective Pixel The device can correct the defective pixels on the screen which are not performed as expected. Steps 1. Hold 2. Select 3. press 4. Press 5. Press to show the menu. . to select the offset. The offset refers to the moving length of cursor. or to select the moving direction. to move the cursor to the position of dead pixel. Hold to correct the dead pixel. Note If the menu blocks the dead pixel, hold to perform mirror display.
Handheld Thermal Monocular Camera User Manual Chapter 4 Measure the Distance The device can detect the distance between the target and the observation position. Before You Start When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy may be affected. Steps 1. Hold to show the menu. 2. Select and press to go to the setting interface. 1) Press or to select the target from Deer, Wolf, Bear, and Custom. 2) Set the target height. Note The available height ranges from 0.
Handheld Thermal Monocular Camera User Manual Figure 4-2 Set the Edge of Target Bottom Result The left top of the image displays the distance measurement result and the height of the target. Figure 4-3 Measurement Result Note Go to distance measurement interface, and press measuring target.
Handheld Thermal Monocular Camera User Manual Chapter 5 Set Burn-Prevention In the menu, select and press to enable or disable the burn-prevention function. This function can prevent the detector of the thermal channel from being burned. After you enable this function, the shield will close when the grey scale of the detector reaches a certain value. Note When the burn-prevention function is disabled, the shield opens automatically.
Handheld Thermal Monocular Camera User Manual Chapter 6 Highest Temperature Tracking The device can detect the highest temperature spot in the scene and mark it on display. In the menu, select and press to mark the spot of highest temperature. When the function is enabled, displays in the spot of highest temperature. When the scene changes, the moves. Note This function varies according to different camera models.
Handheld Thermal Monocular Camera User Manual Chapter 7 Picture and Video You can manually record video or capture picture when displaying live view. 7.1 Capture Picture On the main live view page, press to capture picture. Note ● When capturing succeeds, the image freezes for 1 second and a prompt shows on the display. For exporting captured pictures, refer to Export Files. 7.2 Record Video Steps 1. In the main live view, hold and start recording.
Handheld Thermal Monocular Camera User Manual 7.3 Export Files This function is used to export recorded videos and captured pictures. Before You Start Turn off hotspot function. Steps 1. Connect the device and PC with cable. Note Make sure the device is turned on when connecting the cable. 2. Open computer disk and select the disk of device. Go to the DCIM folder and find the folder named after the capture year and month.
Handheld Thermal Monocular Camera User Manual Chapter 8 Client Software Connection Connect the device to the T-Vision APP via hotspot, then you can capture picture, record video, or configure parameters on your phone. Steps 1. Hold to show the menu of device. 2. Press to enable hotspot function. 3. Turn on the WLAN of your phone and connect to the hotspot. ● Hotspot Name: HIK-IPTS Serial No. ● Hotspot Password: the last 9 digits of serial No. 4.
Handheld Thermal Monocular Camera User Manual Chapter 9 CVBS Output You can view the image on the display unit for details with this function. Before You Start Purchase the CVBS cable from the manufacturer separately or prepare it by yourself. Connect the device and the display unit via USB to CVBS cable. Make sure the device is turned off when connecting the cable. Steps 1. Hold to show the menu of device. 2. Select CVBS, and press to turn on CVBS output. The display unit show the device image.
Handheld Thermal Monocular Camera User Manual Chapter 10 Maintenance This part introduces the operation of checking device information, upgrading device, and restoring to defaults, etc. 10.1 View Device Information Steps 1. Hold 2. Select to show the menu of device. , and press . You can view the device information such as version, and serial No. 10.2 Upgrade Device Before You Start Please get the upgrade package first. Steps 1. Connect the device to your PC with cable. 2.
Handheld Thermal Monocular Camera User Manual Chapter 11 Frequently Asked Questions 11.1 Why does the charge indicator flash improperly? Check the following items. 1. Check whether the device is charged with standard power adapter and the charging temperature is above 0 °C (32 °F). 2. The device is equipped with built-in charging protection module. Charge the device in power off status. 11.2 Why is the power indicator off? Check whether the device is off-battery.
Handheld Thermal Monocular Camera User Manual Chapter 12 Appendix 12.1 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikmicro thermal cameras. 12.2 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikmicro thermal cameras.
UD25187B
