Quick Start Guide

8
away from magnetic interference.
Power Supply
● The input voltage should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC61010-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid over-
heating or fire hazards caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. Dispose of used
batteries in conformance with the instructions provided by the battery
manufacturer.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● Do not charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
Maintenance
● If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
● Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Using Environment
● Make sure the running environment meets the requirement of the
device. The operating temperature shall be – 20 °C to 55 °C (- 4 °F to
131 °F), and humidity shall be 5% to 95%.