User's Manual

Handheld Thermal Monocular Camera User Manual

Figure 4-2 PIP Effect in Reticle Mode

4.3 Correct Reticle

Correcting the reticle can help you aim at the target with high accuracy by marking the offset

between the big reticle and small reticle.

Before You Start

Select a reticle group first.

Steps

1. In the view mode, hold the wheel to show the menu.

2. Rotate the wheel to select , and press the wheel to enter the reticle setting interface.

3. Press the wheel to select a reticle No. you want to correct.

4. Set the distance to the target.

1) Rotate the wheel to select Distance.

2) Press the wheel to select the number you want to change.

3) Rotate the wheel to change the number.

5. (Optional) Rotate the wheel to select Freeze, and press the wheel to enable the function.

Note

When enabling the freeze function in reticle, you can adjust the position of the cursor on a frozen

image. This function can prevent image flutter.

6. Set the reticle position.

1) Aim the big reticle at the target.

2) (Optional) Rotate the wheel to select Zoom, and press the wheel to switch the zoom ratio.

3) Rotate the wheel to select the coordinates, and press the wheel to switch the X and Y axis.

4) Rotate the wheel to move the reticle until it reaches the target position. The small reticle