User's Manual

Handheld Thermal Monocular Camera User Manual

Chapter 4 Aiming Point Settings

4.1 Select Reticle Group

If different users use the same device, the users can configure and save the reticle settings in their

respective reticle group.

Steps

1. In the view mode, hold the wheel to show the menu.

2. Rotate the wheel to select .

3. Press the wheel to switch the reticle group.

4. Hold the wheel to save and exit.

Result

The right top of the image displays the reticle information. For example, A3-100 m means you are

using the No. 3 reticle in reticle group A, and the set range is 100 m.

Figure 4-1 Set Reticle Group

Note

There are 5 reticle groups in total, and you can configure 5 reticles in each reticle group.

4.2 Set Reticle

You can select a reticle in the current reticle group, and set parameters such as type, color, and