User's Manual

Handheld Thermal Monocular Camera User Manual
6
3.5 Set Smart IR
Image overexposure may occur in too bright environment. The smart IR function helps to adjust
the overexposed images, and it can improve the image effect in night mode by adjusting the
brightness of the supplement light.
In menu mode, rotate the wheel to select and press the wheel to enable this function.
3.6 Set Display Mode
You can select different display modes in different scenes.
Hold in live view interface to switch display modes. Day, night, defog, and auto are
selectable. The current mode is displayed on the right top of the interface.
Figure 3-2 Display Mode
3.7 Adjust Digital Zoom
In the live view interface, rotate the wheel to switch the digital zoom of the device. The value of
digital zoom can be set to 1×, 2×, 4×, and 8×.
3.8 Set Picture in Picture Mode
Steps
1. In the view mode, hold the wheel to show the menu.
2. Select , and press the wheel to enable the PIP function. The details are shown at the up-
center of the image.
You can also press in the live view interface to enable/disable PIP function.