Manualshelf

User's Manual

ManualsBrandsHikmicro ManualsHunting & FishingDigital Night Vision Scope/Digital Night Vision Monocular
11121314151617181920
Handheld Thermal Monocular Camera User Manual
3
Chapter 2 Preparation
2.1 Cable Connection
Connect the device and power adaptor with a type-C cable to power on the device. Alternatively,
connect the device and PC to export files.
Steps
1. Lift the cable interface cover.
2. Connect the device and power adapter with a Type-C cable to power on the device.
Alternatively, connect the device and PC to export files.
2.2 Install Battery
Insert the batteries into the battery compartment.
Steps
1. Turn the battery cover anticlockwise to loosen it.
2.
Insert the battery into the battery compartment with the positive mark inward.
3. Turn the battery cover clockwise to tighten it.
Note
Remove the battery from the battery compartment if the device is not used for a long time.
2.3 Install Rail
Insert the batteries into the battery compartment.
Before You Start
● Turn off the device first.
Use the Non-dust cloth to clean the device base and the rail.
Steps
1. Align the installation holes on the device and the rail.
2. Insert the screws.
3. Tighten the screws to secure the device.