Quick Start Guide
Table Of Contents
- 1. Brief Description
- 3. Install Battery (Page 3 – B)
- 4. Install Rail (Page 4 – C)
- 5. Connect Device (Page 5 – E)
- 3. Akku installieren (Seite 2 – C)
- 5. Schiene installieren (Seite 3 - D)
- 5. Gerät anschließen (Seite 4 – E)
- 3. Installer les piles (page 2 – C)
- 6. Installer le rail (page 3 – D)
- 5. Connecter l’appareil (page 4 – E)
- 3. Instalación de la pila (página 2 - C)
- 7. Instalación con riel (página 3 - D)
- 5. Conexión del dispositivo (Page 4 – E)
- 3. Instalar as pilhas (Página 2 – C)
- 8. Instalar a calha (Página 3 – D)
- 5. Ligar o dispositivo (Página 4 – E)
- 3. Installazione della batteria (Pagina 2 – C)
- 4. Installazione della guida (Pagina 3 – D)
- 5. Collegamento del dispositivo (Pagina 4 – E)
- 3. Instalace baterie (strana 2 – C)
- 5. Instalace kolejnice (strana 3 – D)
- 5. Připojení zařízení (strana 4 – E)
- 3. Inštalácia batérie (strana 2 – C)
- 6. Inštalácia koľajničky (strana 3 – D)
- 5. Pripojenie zariadenia (strana 4 – E)
- 3. Instalowanie baterii (str. 2 – C)
- 7. Instalowanie na szynie montażowej (str. 3 – D)
- 5. Podłączanie urządzenia (str. 4 – E)
- 3. Akkumulátor beszerelése (Oldal: 2 - C)
- 8. Sín felszerelése (Oldal 3 – D)
- 5. A készülék csatlakoztatása (Oldal: 4 – E)
- 3. Instalare baterie (Pagina 2 - C)
- 9. Instalare șină (Pagina 3 - D)
- 5. Conectare dispozitiv (Pagina 4 - E)
- 3. Batterij plaatsen (pagina 2 – C)
- 10. Rail plaatsen (pagina 3 – D)
- 5. Apparaat verbinden (pagina 4 – E)
- 3. Installér batteri (side 2 – C)
- 11. Montér skinne (side 3 – D)
- 5. Tilslut enhed (side 4 – E)
- 3. Installer batteri (side 2 – C)
- 12. Installer skinne (side 3 – D)
- 5. Tilkoble enheten (side 4 – E)
- 3. Asenna paristo (sivu 2 – C)
- 13. Kiskoasennus (sivu 3 – D)
- 5. Yhdistä laite (sivu 4 – E)
- 3. Montering av batteri (sida 2 – C)
- 14. Montering på skena (sida 3 – D)
- 5. Anslutning av enheten (sida 4 – E)
- 3. Установка батареи (стр. 2 – C)
- 4. Установка направляющей (стр. 3 – D)
- 5. Подключение устройства (стр. 4 – E)
- 3. Pilin Takılması (Sayfa 2 – C)
- 15. Rayın Takılması (Sayfa 3 - D)
- 5. Cihazın Bağlanması (Sayfa 4 – E)
- 3.バッテリーの取り付け（2 – Cページ）
- 4. レールの取り付け（3 – Dページ）
- 5.デバイスの接続（4 – Eページ）
- 3. 배터리 설치(페이지 2 – C)
- 16. 레일 설치(페이지 3 – D)
- 5. 장비 연결 (페이지 4 – E)
- 3.安裝電池（第 2 頁—C）
- 17. 安裝導軌（第 3 頁—D）
- 5.連線裝置（第 4 頁—E）
6
English
1. Brief Description
The thermal image scope is equipped with high-sensitivity IR detector,
and adopts advanced thermal imaging technology, to get clear view in
poor visibility or dark environment. It helps to view the target and
measure the distance. The device is mainly applied to outdoor scenarios
such as hunting, law enforcement, etc.
The device can capture snapshots, record videos, and set parameters by
T-Vision App after being connected to your phone via hotspot. Search the
T-Vision on App Store (iOS System) or Google Play™ (Android System) t
o
do
wnload it, or scan the QR code to download and install the A
pp.
Android System
iOS System
2. Appearance
There are two types of thermal image scopes. Please take the actual
product for reference. The buttons, components and interface of the two
types of thermal image scopes are the same.
Component & Interface (Page 1 – A)
No. Component Function
1 Power Key
● Press: Standby Mode/Wake up Device
● Hold: Power On/Off
2 Measure Key
● Press: capture
● Hold: measure the distance with laser
3 Wheel
● Press: switch palettes
● Hold: menu operation