Quick Start Guide

12
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
This equipment should be installed and operated with a minimum
distance 41.21mm between the radiator and your head.
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss.
Laws and Regulations
● Use of the product must be in strict compliance with the local electrical
safety regulations.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.
Power Supply
● The input voltage for the device should meet the Limited Power Source
(5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to
technical specifications for detailed information.
● The battery charger is included in the package. The input voltage for the
supplied battery charger should meet the Limited Power Source (5 VDC,
2 A).
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid