Quick Start Guide
Table Of Contents
- 1. Brief Description
- 3. Install Battery (Page 2 – C)
- 4. Install Rail (Page 3 – D)
- 5. Connect Device (Page 4 – E)
- 3. Akku installieren (Seite 2 – C)
- 4. Schiene installieren (Seite 3 - D)
- 5. Gerät anschließen (Seite 4 – E)
- 3. Installer les piles (page 2 – C)
- 4. Installer le rail (page 3 – D)
- 5. Connecter l’appareil (page 4 – E)
- 3. Instalación de la pila (página 2 – C)
- 4. Instalación con riel (página 3 - D)
- 5. Conexión del dispositivo (Page 4 – E)
- 3. Instalar as pilhas (Página 2 – C)
- 4. Instalar a calha (Página 3 – D)
- 5. Ligar o dispositivo (Página 4 – E)
- 3. Installazione della batteria (Pagina 2 – C)
- 4. Installazione della guida (Pagina 3 – D)
- 5. Collegamento del dispositivo (Pagina 4 – E)
- 3. Instalace baterie (strana 2 – C)
- 4. Instalace kolejnice (strana 3 – D)
- 5. Připojení zařízení (strana 4 – E)
- 3. Inštalácia batérie (strana 2 – C)
- 4. Inštalácia koľajničky (strana 3 – D)
- 5. Pripojenie zariadenia (strana 4 – E)
- 3. Instalowanie baterii (str. 2 – C)
- 4. Instalowanie na szynie montażowej (str. 3 – D)
- 5. Podłączanie urządzenia (str. 4 – E)
- 3. Akkumulátor beszerelése (Oldal: 2 - C)
- 4. Sín felszerelése (Oldal 3 – D)
- 5. A készülék csatlakoztatása (Oldal: 4 – E)
- 3. Instalare baterie (Pagina 2 - C)
- 4. Instalare șină (Pagina 3 - D)
- 5. Conectare dispozitiv (Pagina 4 - E)
- 2. Verschijning
- 3. Batterij plaatsen (pagina 2 – C)
- 5. Rail plaatsen (pagina 3 – D)
- 5. Apparaat verbinden (pagina 4 – E)
- 3. Installér batteri (side 2 – C)
- 4. Montér skinne (side 3 – D)
- 5. Tilslut enhed (side 4 – E)
- 3. Installer batteri (side 2 – C)
- 4. Installer skinne (side 3 – D)
- 5. Tilkoble enheten (side 4 – E)
- 3. Asenna paristo (sivu 2 – C)
- 4. Kiskoasennus (sivu 3 – D)
- 5. Yhdistä laite (sivu 4 – E)
- 3. Montering av batteri (sida 2 – C)
- 4. Montering på skena (sida 3 – D)
- 5. Anslutning av enheten (sida 4 – E)
- 3. Установка батареи (стр. 2 – C)
- 4. Установка направляющей (стр. 3 – D)
- 5. Подключение устройства (стр. 4 – E)
- 3. Pilin Takılması (Sayfa 2 – C)
- 6. Rayın Takılması (Sayfa 3 - D)
- 5. Cihazın Bağlanması (Sayfa 4 – E)
- 2.外観
- 3.バッテリーの取り付け（2 – Cページ）
- 4. レールの取り付け（3 – Dページ）
- 5.デバイスの接続（4 – Eページ）
- 3. 배터리 설치(페이지 2 – C)
- 4. 레일 설치(페이지 3 – D)
- 5. 장비 연결 (페이지 4 – E)
- 3.安裝電池（第 2 頁—C）
- 4. 安裝導軌（第 3 頁—D）
- 5.連線裝置（第 4 頁—E）
7
Select
the correct battery voltage in the device menu, or it may cause
abnormal shutdown.
4. Install Rail (Page 3 – D)
Steps
1. Install the device to the rail as the black arrow shows.
2. Insert and tighten the screws.
3. Tighten the knobs to secure the device.
Note:
Turn off the device first.
Use the non-dust cloth to clean the device base and the rail.
5. Connect Device (Page 4 – E)
Steps
1. Turn on the device and make sure the hotspot function is disabled.
2. Lift the cover of data exchange interface.
3. Connect the device and power adapter with a type-C cable to power on
the device. Alternatively, connect the device and PC to export files.
User Manual
Legal Information
© 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the HIKMICRO