Quick Start Guide
Table Of Contents
- 1. Brief Description
- 3. Install Battery (Page 2 – C)
- 4. Install Rail (Page 3 – D)
- 5. Connect Device (Page 4 – E)
- 3. Akku installieren (Seite 2 – C)
- 4. Schiene installieren (Seite 3 - D)
- 5. Gerät anschließen (Seite 4 – E)
- 3. Installer les piles (page 2 – C)
- 4. Installer le rail (page 3 – D)
- 5. Connecter l’appareil (page 4 – E)
- 3. Instalación de la pila (página 2 – C)
- 4. Instalación con riel (página 3 - D)
- 5. Conexión del dispositivo (Page 4 – E)
- 3. Instalar as pilhas (Página 2 – C)
- 4. Instalar a calha (Página 3 – D)
- 5. Ligar o dispositivo (Página 4 – E)
- 3. Installazione della batteria (Pagina 2 – C)
- 4. Installazione della guida (Pagina 3 – D)
- 5. Collegamento del dispositivo (Pagina 4 – E)
- 3. Instalace baterie (strana 2 – C)
- 4. Instalace kolejnice (strana 3 – D)
- 5. Připojení zařízení (strana 4 – E)
- 3. Inštalácia batérie (strana 2 – C)
- 4. Inštalácia koľajničky (strana 3 – D)
- 5. Pripojenie zariadenia (strana 4 – E)
- 3. Instalowanie baterii (str. 2 – C)
- 4. Instalowanie na szynie montażowej (str. 3 – D)
- 5. Podłączanie urządzenia (str. 4 – E)
- 3. Akkumulátor beszerelése (Oldal: 2 - C)
- 4. Sín felszerelése (Oldal 3 – D)
- 5. A készülék csatlakoztatása (Oldal: 4 – E)
- 3. Instalare baterie (Pagina 2 - C)
- 4. Instalare șină (Pagina 3 - D)
- 5. Conectare dispozitiv (Pagina 4 - E)
- 2. Verschijning
- 3. Batterij plaatsen (pagina 2 – C)
- 5. Rail plaatsen (pagina 3 – D)
- 5. Apparaat verbinden (pagina 4 – E)
- 3. Installér batteri (side 2 – C)
- 4. Montér skinne (side 3 – D)
- 5. Tilslut enhed (side 4 – E)
- 3. Installer batteri (side 2 – C)
- 4. Installer skinne (side 3 – D)
- 5. Tilkoble enheten (side 4 – E)
- 3. Asenna paristo (sivu 2 – C)
- 4. Kiskoasennus (sivu 3 – D)
- 5. Yhdistä laite (sivu 4 – E)
- 3. Montering av batteri (sida 2 – C)
- 4. Montering på skena (sida 3 – D)
- 5. Anslutning av enheten (sida 4 – E)
- 3. Установка батареи (стр. 2 – C)
- 4. Установка направляющей (стр. 3 – D)
- 5. Подключение устройства (стр. 4 – E)
- 3. Pilin Takılması (Sayfa 2 – C)
- 6. Rayın Takılması (Sayfa 3 - D)
- 5. Cihazın Bağlanması (Sayfa 4 – E)
- 2.外観
- 3.バッテリーの取り付け（2 – Cページ）
- 4. レールの取り付け（3 – Dページ）
- 5.デバイスの接続（4 – Eページ）
- 3. 배터리 설치(페이지 2 – C)
- 4. 레일 설치(페이지 3 – D)
- 5. 장비 연결 (페이지 4 – E)
- 3.安裝電池（第 2 頁—C）
- 4. 安裝導軌（第 3 頁—D）
- 5.連線裝置（第 4 頁—E）
12
Transportation
●
Keep the device in original or similar packaging while transporting it.
●
Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
●
Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.
Power Supply
●
The input voltage should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC61010-1 standard. Please refer to technical
specifications for detailed information.
●
Make sure the plug is properly connected to the power socket.
●
DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
Battery
●
Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. The battery type
is CR123A*2/RCR123A*2. Dispose of used batteries in conformance
with the instructions provided by the battery manufacturer.
●
For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
●
Do not charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
Maintenance
●
If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.