User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Picture and Video
- Chapter 6 Distance Detection
- Chapter 7 Connect Bluetooth
- Chapter 8 Set LED Light
- Chapter 9 Thermal View APP Connection
- Chapter 10 Maintenance
- Chapter 11 Appendix
Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulaons
• Use of the product must be in strict compliance with the local electrical safety regulaons.
Transportaon
• Keep the device in original or similar packaging while transporng it.
• Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportaon without the original
wrapper may result in damage on the device and the company shall not take any responsibilies.
• DO NOT drop the product or subject it to physical shock. Keep the device away from magnec
interference.
Power Supply
• Please purchase the charger by yourself. Input voltage should meet the Limited Power Source (5
VDC, 2A) according to the IEC61010-1 standard. Please refer to technical specicaons for
detailed
informaon.
• Make sure the plug is properly connected to the power socket.
• DO NOT connect mulple devices to one power adapter, to avoid over-heang or re hazards
caused by overload.
Baery
• Improper use or replacement of the baery may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used baeries in conformance with the instrucons
provided by the baery manufacturer.
• The built-in baery cannot be dismantled. Please contact the manufacture for repair if
necessary.
• For long-term storage of the
baery, make sure it is fully charged every half year to ensure the
baery quality. Otherwise, damage may occur.
Maintenance
• If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
• A few device components (e.g.,
electrolyc capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Handheld Thermography Camera User Manual
vi