User's Manual

Chapter 10 Maintenance
10.1 View Device Informaon
Go to Local Sengs → Device Informaon to view the device informaon.
10.2 Set Date and Time
Steps
1. Go to Local Sengs → Device Sengs → Time and Date .
2. Set the date and me.
3. Press to save and exit.
Note
Go to Local Sengs → Image Sengs → Display Sengs to enable or disable me and date
display.
10.3 Upgrade Device
Steps
1. Connect the device to your PC with cable and open the detected disk.
2. Copy the upgrade
le and paste it to the root directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device and then it will upgrade automacally. The upgrading process will be
displayed in the main interface.
Note
Aer upgrading, the device reboots automacally. You can view the current version in Local
Sengs → Device Informaon .
10.4 Restore Device
Go to Local Sengs → Device Sengs → Device Inializaon to inialize the device and restore
default sengs.
Handheld Thermography Camera User Manual
33